HOT OIL PUMP
Hot oil pumps as they are otherwise known, are designed for the movement of heat-transfer oils under high temperature conditions. High temperature oil pumps such as these are primarily used to feed an oil burner or furnace, or as a hot oil circulation pump for circulating the fuel as part of a larger boiler feed or heating system.
Hot oil pumps need to be able to handle high temperature, lubricating fluids and are often supplied with a double mechanical seal system to allow the cooling of the seals to deal with such temperatures.
Capacity : Up to 180 M3/hr
Head : Up to 80 metres
Discharge Size : 32 mm to 80 mm
Temperature : Up to 350°C
Pressure : Up to 8 Kg/cm2
Speed : up to 3500 rpm
- Petro-chemical industries.
- Oil industries.
- Synthetic-fiber industries.
- Textile, dying, printing industries.
- Plastic & rubber industries.
- Chemical Industries.
- Paper & Pulp Industries
- Timber making industries.
- Sugar Industries.
- Food industries.
- Pharmaceutical Industries.
- Construction industries.
- Horizontal, single stage, single suction volute type, air-cooled centrifugal pumps with closed impeller pump shaft is supported by two heavy duty ball bearings, heat resistant mechanical seal, suction flange is on the front and axial, discharge flange is at top & radial.
- Centerline supported casing.
- Low maintenance cost.
- Can be supplied bare-shaft or with IE3 motors for energy saving.
- Grey cast iron, CS, Alloy cast steel