Rotary Gear Pump
Rotary Gear Pump is self priming, foot mounting type positive displacement rotary gear pump.
These pumps can be operated up to pressure of 10 kg/cm² with 5 LPM to 500 LPM flow capacity. These pumps are designed to run at 1440 RPM up to viscosity of 50,000 to 1,00,000 SSU and maximum temperature up to 200ºc. It is desirable to reduce speed for size above 1½” performance at low speed is always advantageous as it improves efficiency, reduce noise level and enhances operational life. The capacity will reduce in proportion to the speed
Capacity : Up to 200 M3/hr
Head : Up to 120 metres
Discharge Size : 12 mm to 120 mm
Temperature : Up to 200°C
Pressure : Up to 12 Kg/cm2
Speed : Up to 1440 rpm
- LGP pumps are gravity suction heavy duty PD pumps with specially designed for the low NPSH application like Oil separator, Vacuum application, Hot oil pumping application, etc…
- Barrels unloading.
- Large use rolling mills for picking and solvent plant.
- Pharmaceutical.
- Laminates.
- They can be used for viscous and aggressive fluids.
- Compact in size, low noise, and high efficiency.
- Easy maintenance, longer life, economical.
- An inbuilt pressure relief valve.
- Bush bearing with a heavy shaft.
- Double helical gears to reduce axial thrust.
- Continuous duty.
- Handle multiple liquids.
- Unique design.
- Can be supplied bare-shaft or with IE3 motors for energy saving.
- C. I, C.S, SS-304 / 304L, SS316 / 316L, Bronze, Alloy-20, CD4MCU Hast alloy B & C, etc.
- Duplex stainless steel, Super duplex stainless steel